Product Overview :
When it comes time to lift or modify an IFS vehicle the first sign of
trouble is usually the alignment and handling of the front suspension.
While minor adjustments can usually be done with the lower camber bolts,
bigger lifts will need a lot more!
Another problem many find is that once a longer travel shock or a
spring package that allows increased travel is fitted, the upper control
arms may contact the chassis or the spring itself. A steeper angle on
the upper control arm moves the steering knuckle inboard and increases
the angularity on the ball joints, sometimes maxing out their movement.
With a raised suspension height, the upper ball-joint is forced
to operate at an extreme angle and wider tires may not clear the factory
upper control arms. An over-stressed ball-joint also has the
potential to separate or break, leading to catastrophic failure of
suspension, steering, and CV axle. The preferable solution is to replace
the factory arm with a newly designed upper arm, which allows greater
clearance for the thicker or heavier aftermarket coils generally
required to lift the vehicle.
These Upper Control Arm featuring with ball joint and high-quality
bushings, this arm is designed to correct alignment angles while
maintaining factory ride quality. Cast steel designs provide the
strength and durability needed for the most demanding environments.
Features :
- 100% Brand New
- Colour : Black
- Material : Steel
- Comes with Ball Joint
- Design to correct alignment angles
Notes :
- Not Including Installation Guide or Manual
- Professional Installation is Recommended
- Only Fits For 4WD & 2 INCH LIFTED VEHICLE MODEL
- When install these control arm, please Jack-Up your car's knuckle
to make the control arm balance before lock the bushing. As it will
extend the life span of the bushing. If you did not balance the control
arm before lock the bushing, after installation the bushing will twisted
and it will reduce the life span of the bushing.
- You might need to change your rims to fit this item.
Applications :
- 2005 - 2014 Mitsubishi Triton L200 [ ML / MN ]
- 2015 - Present Mitsubishi Triton L200 [ MQ / MR ]
- 2008 - 2015 Pajero Sport PB PC
- 2015 - 2023 Pajero Sport QE QF
*** Please make sure it fits your cars before purchase ***
Package Content :
- 1 Pair ( Left & Right ) Front Upper Control Arm
Packing Size : 44 x 37 x 15 cm
Packing Weight : 9 kg
Actual Weight : 8.8 kg
L-ROO
